Module Details

Module Code: PROJ H2610
Module Title: Project 2 (Mechanical)
Title: Project 2 (Mechanical)
Module Level:: 6
Credits:: 5
Module Coordinator: Cathal Nolan
Module Author:: Edmond Tobin
Domains:  
Module Description: The aim of this module is to introduce a student to the mechanical workshop environment. On completion of this module, the student will have the required practical knowledge to read and understand basic 2D and 3D engineering mechanical drawings, to be able to recognise various engineering materials, to select the correct material for a particular purpose, to use hand and machine tools proficiently, to be competent in the use of measuring equipment, to know how to carry out a number of processes, such as Hand Fabrication, Turning, Milling, and Drilling, to be able to measure, assemble, and test the manufactured pieces, and to be aware of the need for a safe working environment at all times.
 
Learning Outcomes
On successful completion of this module the learner will be able to:
# Learning Outcome Description
LO1 Interpret mechanical drawings presented in 2D and 3D format
LO2 Use hand and measuring tools to mark-up work-pieces within defined tolerances.
LO3 Identify common engineering materials, know their individual properties, composition, uses, sustainability and ethical application.
LO4 Set up and execute turning, milling, and drilling, and hand-machining operations, working to provided tolerances while adhering to safe working practices.
LO5 Apply health and safety requirements in a workshop environment.
Dependencies
Module Recommendations

This is prior learning (or a practical skill) that is recommended before enrolment in this module.
No recommendations listed
Co-requisite Modules
No Co-requisite modules listed
Additional Requisite Information
No Co Requisites listed
 
Indicative Content
Engineering Drawings
Interpretation of all dimensions and materials identified on a drawing Marking out all appropriate measurements on the work pieces Manufacturing methods and materials used to complete each work piece
Health & Operational Safety
 Maintenance of a neat and tidy workspace at all times  Relevant safety procedures  Personal protective equipment where necessary
Hand Tools
 Safety and careful use of all hand tools as instructed  Identification of damaged/unadjusted tools and appropriate actions  Safety equipment and tool guards as necessary  correct reset and storage of each tool after use
Power Tools
 Safe and careful use of all power tools as instructed  Identification of damaged/unadjusted machines and appropriate actions  Safety equipment and machine guards as necessary  Correct reset and cleaning of each machine after use
Preparation for manufacture
Facing, planing, punching, scribing and marking out of stock material to aid manufacture of assessed components.
Manufacture of metallic components for assessment.
Manufacture of project components using appropriate hand and power tools, lathes and milling machines in order to produce components with flat, angled surfaces with holes/slots and cylindrical components with concentric holes/bores. Examples may be the likes of a simple depth gauge, male to female cylindrical fittings, a toolmakers clamp and a compressed air engine.
Assembly & Test Procedures
 Standard tools, fasteners and maintenance techniques  Effective assembly of workpiece without using excessive force  Manufacture and operational testing of completed components
Tasks Cards
 Clear, concise written description of all steps taken during each task  Completion of a project logbook and/or task cards as appropriate
Module Content & Assessment
Assessment Breakdown%
Project80.00%
Practical20.00%

Assessments

Full Time

No Continuous Assessment
Project
Assessment Type Project % of Total Mark 80
Timing Week 12 Learning Outcomes 1,2,3,4,5
Non-marked No
Assessment Description
Project Assessments will be practical assignment / project based. Individual feedback will be provided throughout the semester.
Practical
Assessment Type Practical/Skills Evaluation % of Total Mark 20
Timing End-of-Semester Learning Outcomes 1,2,3,4,5
Non-marked No
Assessment Description
Students must complete an in-workshop practical test.
No End of Module Formal Examination

Part Time

No Continuous Assessment
Project
Assessment Type Project % of Total Mark 80
Timing Week 12 Learning Outcomes 1,2,3,4
Non-marked No
Assessment Description
Project Assessments will be practical assignment / project based.
Practical
Assessment Type Practical/Skills Evaluation % of Total Mark 20
Timing End-of-Semester Learning Outcomes 1,2,3,4
Non-marked No
Assessment Description
Students must complete an in-workshop practical test.
No End of Module Formal Examination
Reassessment Requirement
Repeat the module
The assessment of this module is inextricably linked to the delivery. The student must reattend the module in its entirety in order to be reassessed.
Reassessment Description
Learners that fail but achieve a minimum final percentage of 30% in the module will be eligible for one or more of the following: Submit assignment, Re-submit components, Practical examination, Interview or Presentation.

SETU Carlow Campus reserves the right to alter the nature and timings of assessment

 

Module Workload

Workload: Full Time
Workload Type Workload Category Contact Type Workload Description Frequency Average Weekly Learner Workload Hours
Practicals Contact Workshop Attendance Only. 12 Weeks per Stage 4.00 48
Independent Learning Non Contact Planning and reviewing drawings and preparing for practical examination 15 Weeks per Stage 5.13 77
Total Weekly Contact Hours 4.00
 
Module Resources
Supplementary Book Resources
  • Federal Aviation Administration. Airframe and Powerplant Mechanics General Handbook, Jeppesen Sanderson, Inc., p.561, [ISBN: 089100078X].
  • A & P Technician Airframe Textbook, Iap, [ISBN: 0891003959].
  • Jeppesen Sanderson Inc.. A & P Technician General Textbook, Jeppesen Sanderson, Inc., p.533, [ISBN: 0884872033].
  • Rhodes & Cook. Basic Engineering Drawing, [ISBN: 81-85614-93-8].
  • Richard Budzik. (1985), Practical sheet metal projects, Practical Publications, Chicago, Ill., [ISBN: 0912914289].
  • by Nick Bonacci. Aircraft sheet metal, IAP, Casper, Wyo., [ISBN: 0891002960].
  • prepared under the direction of the ASM International Handbook Committee. (1990), ASM handbook, ASM International, Materials Park, OH, [ISBN: 0871700204].
This module does not have any article/paper resources
Other Resources
  • Course Documents.
Discussion Note: